MD1 and MG1 (MDG1) ISN Reading of following DME/DDE (writing is possible for some DMEs):

• DME_840
• DME_840H
• DME_84T0
• DME_860
• DME_86T0
• DME_880
• DME_88T0
• DDE803P
• DDE832C

MD1 and MG1 (MDG1) ISN Reading of following DME/DDE:

• DME_83T1
• DME_840
• DME_841
• DME_841H
• DME_861
• DME_88T0
• DDE803

Autohex II reads and writes all ISN of DME/DDE in F series:

• EDC17C41
• EDC17C41
• EDC17C50
• EDC17C56
• EDC17C76
• EDC17CP09
• EDC17CP45
• EDC17CP49
• MEVD17.2
• MEVD17.2.3
• MEVD17.2.4
• MEVD17.2.5
• MEVD17.2.6
• MEVD17.2.8
• MEVD17.2.9
• MEVD17.2.G
• MEVD17.2.H
• MEVD17.2.P

Autohex II reads all ISN of DME/DDE in E series:

• EDC17C06
• EDC17C41
• EDC17C50
• EDC17C56
• EDC17C76
• EDC17CP02
• EDC17CP09
• EDC17CP45
• EDC17CP49
• MSV80
• MSV80.1
• MSD80
• MSD81
• MSD85
• MSD85Y
• MSS60
• MED17.2
• MEV17.2
• MEV17.2.2
• MEVD17.2
• MEVD17.2.2
• MEVD17.2.7
• MEV1746
• MEVD17.2.4
• MEVD17.2.5
• MEVD17.2.9

Autohex II reads the ISN of DME/DDE in E series:

• EDC16C1
• EDC16C31
• EDC16C35
• EDC16CP35
• ME9
• ME9.2
• ME9.2.2
• MEV9.2
• MSV70
• MS45

Autohex II is the most advanced tool for BMW Ecu programming, it supports E series, F Series and G Series

With Autohex II you can read and write ISN from all CAS versions in E and F series

This function is important when the DME/DDE is not responding, and you need the ISN for replacment

You can reset EWS security from all BMW E series EGS by OBD

You can reset EWS in EGS 6HP (On Bench) and 8HP by OBD or On Bench

Autohex II calculates the required coding data automatically from the car vehicle order, then it applies these data to the target module

You can modify the Ecu coding to add and remove features in any Ecu in BMW cars

You can modify the Vehicle Order to do retrofit the configuraion. You can also backup and restore the FA from the backup Ec

CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM and BDC are supported by Autohex II, this includes if all keys lost

You can unlock secrity of CAS4/4+, BDC and FEM to able to:

• Change CAS and BDC and FEM VIN
• Change CAS and BDC and FEM ISN
• Mileage Reset for CAS and BDC and FEM
• Making a key for CAS and BDC and FEM

With Autohex II you can read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the Ecu.

Hextag is a powerful tool for Ecu cloning, Chip tuning, All CAS versions read/write and Key/EEPROM Reset, with Hextag:

• Ecu Cloning/Tuning for a wide range of brands. This function is free for 30 days
• Read and write CAS 1,2,3,4 and 4+ EEPROM and FLASH 100% safely
• Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol
• Modify KOMBI (instrument cluster) Mileage
• Repair FRM for BMW in one click
• Renew all BMW keys, and many other brands